Skip to main content

Research Repository

Advanced Search

Direct measurement of ammonia in simulated human breath using an inkjet-printed polyaniline nanoparticle sensor

Killard, Anthony J.; Killard, Anthony; Hibbard, Troy; Crowley, Karl

Direct measurement of ammonia in simulated human breath using an inkjet-printed polyaniline nanoparticle sensor Thumbnail


Authors

Anthony J. Killard

Troy Hibbard

Karl Crowley



Abstract

A sensor fabricated from the inkjet-printed deposition of polyaniline nanoparticles onto a screen-printed silver interdigitated electrode was developed for the detection of ammonia in simulated human breath samples. Impedance analysis showed that exposure to ammonia gas could be measured at 962Hz at which changes in resistance dominate due to the deprotonation of the polymer film. Sensors required minimal calibration and demonstrated excellent intra-electrode baseline drift (≤1.67%). Gases typically present in breath did not interfere with the sensor. Temperature and humidity were shown to have characteristic impedimetric and temporal effects on the sensor that could be distinguished from the response to ammonia. While impedance responses to ammonia could be detected from a single simulated breath, quantification was improved after the cumulative measurement of multiple breaths. The measurement of ammonia after 16 simulated breaths was linear in the range of 40-2175ppbv (27-1514μgm-3) (r2=0.9963) with a theoretical limit of detection of 6.2ppbv (4.1μgm-3) (SN-1=3). © 2013 Elsevier B.V.

Citation

Killard, A. J., Killard, A., Hibbard, T., & Crowley, K. (2013). Direct measurement of ammonia in simulated human breath using an inkjet-printed polyaniline nanoparticle sensor. Analytica Chimica Acta, 779, 56-63. https://doi.org/10.1016/j.aca.2013.03.051

Journal Article Type Article
Publication Date May 24, 2013
Publicly Available Date Jun 7, 2019
Journal Analytica Chimica Acta
Print ISSN 0003-2670
Electronic ISSN 1873-4324
Publisher Elsevier
Peer Reviewed Peer Reviewed
Volume 779
Pages 56-63
DOI https://doi.org/10.1016/j.aca.2013.03.051
Keywords ammonia, breath, impedance, polyaniline, nanoparticle, inkjet
Public URL https://uwe-repository.worktribe.com/output/933503
Publisher URL http://dx.doi.org/10.1016/j.aca.2013.03.051

Files

ACA-12-2459R1 Measurement of ammonia in breath_REVISED.doc (3.3 Mb)
Document








You might also like



Downloadable Citations