Self-powered, autonomous Biological Oxygen Demand biosensor for online water quality monitoring

Pasternak, G., Greenman, J. and Ieropoulos, I. (2017) Self-powered, autonomous Biological Oxygen Demand biosensor for online water quality monitoring. Sensors and Actuators B: Chemical, 244. pp. 815-822. ISSN 0925-4005 Available from: http://eprints.uwe.ac.uk/31636

[img]
Preview
PDF - Published Version
Available under License Creative Commons Attribution 4.0.

1MB

Publisher's URL: http://doi.org/10.1016/j.snb.2017.01.019

Abstract/Description

Standard Biological Oxygen Demand (BOD) analysis requires 5 days to complete. To date, microbial fuel cell biosensors used as an alternative method for BOD assessment requires external apparatus, which limits their use for on-line monitoring in remote, off-grid locations. In this study, a self-powered, floating biosensor was developed for online water quality monitoring. This approach eliminated the need for external apparatus and maintenance that would otherwise be required by other techniques. The biosensor was able to detect urine in freshwater and turn ON a visual and sound cues (85 dB). The energy needed to operate the biosensor was produced by the system itself with the use of electroactive microorganisms, inside microbial fuel cells. The Chemical Oxygen Demand (COD) was used as a fast method of biosensor validation. When urine concentration exceeded the lower threshold, corresponding to a COD concentration of 57.7 ± 4.8 mgO2 L−1, the biosensor turned the alarm ON. The shortest observed actuation time, required to switch ON the alarm was 61 min, when the urine concentration was 149.7 ± 1.7 mgO2 L−1. Once the sensor was switched ON, the signal was emitted until the urine organic load decreased to 15.3 ± 1.9 mgO2 L−1. When ON, the microbial fuel cell sensor produced a maximum power of 4.3 mW. When switched OFF, the biosensor produced 25.4 μW. The frequency of the signal was proportional to the concentration of urine. The observed frequencies varied between 0.01 and 0.59 Hz. This approach allowed to correlate and quantitatively detect the presence of water contamination, based on signal frequency. The sensor was operating autonomously for 5 months. This is the first report of a self-powered, autonomous device, developed for online water quality monitoring.

Item Type:Article
Uncontrolled Keywords:water quality, online monitoring, self-powered biosensor, BOD, energy harvesting, microbial fuel cell
Faculty/Department:Faculty of Environment and Technology > Department of Engineering Design and Mathematics
ID Code:31636
Deposited By: C. Vaughton
Deposited On:24 Apr 2017 14:53
Last Modified:26 Apr 2017 03:47

Request a change to this item

Total Document Downloads in Past 12 Months

Document Downloads

Total Document Downloads

More statistics for this item...