Browse by Creator

Article

Stanic, M. print, Lozo, B. print and Walters, P. print (2010) Reproduction in three-dimensional ink jet printing. Journal of Imaging Science and Technology, 54 (6). ISSN 1062-3701

Walters, P. print and Davies, K. print (2010) 3D printing for artists: research and creative practice. Rapport: Journal of the Norwegian Print Association, 1. pp. 12-15. ISSN 1891-0408

Rossiter, J. print, Walters, P. print and Stoimenov, B. print (2009) Printing 3D dielectric elastomer actuators for soft robotics. 11th SPIE Electroactive Polymer Actuators and Devices (EAPAD) conference, San Diego, California, USA, Procee.

Parraman, C. print, Walters, P. print, Huson, D. print and Reid, B. print (2008) Specifying colour and maintaining colour accuracy for 3D printing. Proceedings of Electronic Imaging, Society for Imaging Science and Technology/Society of Photographic Instrumentation Engineers, San Jose, CA, USA, 26-31 January 2008, Procee.

Walters, P. print and Thirkell, P. print (2007) New technologies for 3D realization in Art and Design practice. Artifact, 1 (4). pp. 232-245. ISSN 1749-3463

Book Section

Walters, P. print, McKay, T. G. print, Rossiter, J. M. print, O'Brien, B. M. print and Anderson, I. A. print (2013) 3-dimensional fabrication of soft energy harvesters. In: Bar-Cohen, Y. print, ed. (2013) Proceedings of SPIE Volume 8687. (8687) USA: SPIE. ISBN 9780819494702

Huson, D. print, Parraman, C. print, Klein, S. print, Simske, S. print, Walters, P. print, Adams, G. print and Hoskins, S. print (2012) 3D printing of transparent glass. In: Benning, P. print, Silence, S. print, Simske, S. print and Zapka, W. print, eds. (2012) NIP28/Digital Fabrication 2012 Technical Programme and Proceedings. Springfield, VA: IS&T: The Society for Imaging and Technology, pp. 336-337. ISBN 9780892083022

Wilson, E. print, Anderson, S. R. print, Assaf, T. print, Pearson, M. print, Walters, P. print, Melhuish, C. print, Rossiter, J. print, Pipe, T. print, Dean, P. print and Porrill, J. print (2012) Bioinspired control of electro-active polymers for next generation soft robots. In: Herrmann, G. print, Studley, M. print, Pearson, M. print, Conn, A. print, Melhuish, C. print, Witkowski, M. print, Vadakkepat, P. print and Kim, J. H. print, eds. (2012) Advances in Autonomous Robotics: Joint Proceedings of the 13th Annual TAROS Conference and the 15th Annual FIRA RoboWorld Congress, Bristol, UK, August 20-23, 2012, Proceedings. (7429) Bristol: Springer, pp. 424-425. ISBN 9783642325267

Walters, P. print, Huson, D. print, Parraman, C. print and Stanić, M. print (2011) 3D printing in colour: technical evaluation and creative applications. In: Hoskins, S. print, ed. (2011) Impact 6 Proceedings. Bristol: Impact Press, University of the West of England, pp. 31-39. ISBN 978-1-906501-03-7

Bowers, A. E. print, Walters, P. print, Rossiter, J. print and Ieropoulos, I. print (2011) Dielectric elastomer pump for artificial organisms(Proceedings Paper). In: Carpi, F. print and Bar-Cohen, Y. print, eds. (2011) Electroactive Polymer Actuators and Devices (EAPAD) 2011 (Proceedings Volume). (7976) Proceedings of SPIE. SPIE. ISBN 9780819485380

Huson, D. print, Parraman, C. print and Walters, P. print (2011) 3D printing and colour: A multidisciplinary investigation. In: Hoskins, S. print, ed. (2011) IMPACT 6 Multidisciplinary Printmaking Conference Proceedings. Bristol: Unviersity of the West of England, pp. 31-38.

Walters, P. print, McGoran, D. print and Ieropoulos, I. print (2011) Digital fabrication of a novel bio-actuator for bio-robotic art and design. In: Society for Imaging Science and Technology, print, ed. (2011) NIP27: International Conference on Digital Printing Technologies and Digital Fabrication 2011. (27) USA: The Society for Imaging Science and Technology. ISBN 978892082964

Walters, P. print and McGoran, D. print (2011) Digital fabrication of smart structures and mechanism: Creative applications in art and design. In: Society for Imaging Science and Technology, print, ed. (2011) NIP27: International Conference on Digital Printing Technologies and Digital Fabrication 2011. (27) USA: The Society for Imaging Science and Technology, pp. 185-188. ISBN 978892082964

Walters, P. print, Huson, D. print and Southerland, D. print (2011) Edible 3D Printing. In: Society for Imaging Science and Technology, print, ed. (2011) NIP27: International Conference on Digital Printing Technologies and Digital Fabrication 2011. (27) USA: The Society for Imaging Science and Technology, pp. 819-822. ISBN 978892082964

Walters, P. print (2009) 3D printing and fabrication of “Smart” responsive devices: A comparative investigation. In: (2009) NIP25: International Conference on Digital Printing Technologies and Digital Fabrication 2009, Louisville, Kentucky. (Volume) Society for Imaging Science and Technology. ISBN 978-0-89208-287-2

Walters, P. print and Rossiter, J. print (2008) Three-dimensional fabrication of smart actuators: design applications. In: (2008) NIP24: International Conference on Digital Printing Technologies and Digital Fabrication 2008, Pittsburgh, Pennsylvania, USA. (Volume) Society for Imaging Science and Technology. ISBN 978-0-89208-279-7

Conference or Workshop Item

Hoskins, S. print, Huson, D. print and Walters, P. print (2012) Towards a new ceramic future. In: Towards a New Ceramic Future, Victoria and Albert Museum, Hochhauser Auditorium, London, UK, 17 January 2012. [Unpublished]

Walters, P. print and Davies, K. print (2012) Creative 3D printing. In: Pervasive Media Studio Lunchtime Talks, Pervasive Media Studio, Watershed, Bristol, 28th September, 2012. Bristol: UNSPECIFIED [Unpublished]

Rossiter, J. print, Scarpa, F. print, Takashima, K. print and Walters, P. print (2012) Design of a deployable structure with shape memory polymers. In: Smart Structures: The conference for Smart Sensors, NDE, Aerospace Systems, Energy Harvesting, EAP, and More, San Diego, California, USA, 11th - 15th March 2012., p. 70

Walters, P. print (2011) Made in the future. In: Made in the Future, Science Museum, London, 1st - 3rd June, 2011. London: UNSPECIFIED [Unpublished]

Walters, P. print (2011) Novel 3D printing. In: University of Bristol Institute of Advanced Studies Lecture Series, University of Bristol, Bristol, 25th February, 2011. Bristol: UNSPECIFIED [Unpublished]

Book

Walters, P. print, Stanic, M. print and Lozo, B. print (2009) Image analysis of surface elements reproduction quality in 3D ink-jet printing. Louisville, Kentucky, USA: NIP25: International Conference on Digital Printing Technologies and Digital Fabrication. ISBN 978-0-89208-287-2

Artefact

Walters, P. print, Eisenmann, M. print and Peebles, E. print (2013) 3D reconstruction of ‘Jointed Doll’ by Josef Hartwig and Oskar Schlemmer (1923). [Artefact]

Walters, P. print, Spears, K. print, Kupfer, P. print and Soars, S. print (2012) Insects au gratin. [Artefact]

Walters, P. print and Davies, K. print (2010) “Vela” pulsar sculpture. [Artefact]