# Browse by Creator

Login |

Number of items: 121.## Article
Yao, J. and Yao, Y.
(2017)
Zeolite supported palladium nanoparticle characterization for fuel cell application.
Xing, F., Zhu, Y., Huang, Y. and Yao, Y.
(2017)
Numerical analysis of HyShot Scramjet Model with different throat heights.
Fang, J., Yao, Y., Zheltovodov, A. A. and Lu, L.
(2017)
Investigation of three-dimensional shock wave/turbulent-boundary-layer interaction initiated by a single fin.
Ruan, C., Xing, F., Huang, Y., Yu, X., Zhang, J. and Yao, Y.
(2017)
The influence of acoustic field induced by HRT on oscillation behavior of a single droplet.
Xing, F., Ruan, C., Huang, Y., Fang, X. and Yao, Y.
(2017)
Numerical investigation on shock train control and applications in a scramjet engine.
Yao, J. and Yao, Y.
(2017)
En-situ EXAFS investigation of zeolite supported Pt electrocatalyst structure.
Chen, H., Lin, P., Emrith, K., Narayan, P. and Yao, Y.
(2016)
Ensemble-Empirical-Mode-Decomposition based micro-Doppler signal separation and classification.
Zheng, J., Chen, J., Zheng, Y., Yao, Y., Li, S. and Xiao, Z.
(2016)
An improved local remeshing algorithm for moving boundary problems.
Yao, J. and Yao, Y.
(2016)
Investigation of zeolite supported platinum electrocatalyst for electrochemical oxidation of small organic species.
Chen, J., Zheng, J., Zheng, Y., Xiao, Z., Si, H. and Yao, Y.
(2016)
Tetrahedral mesh improvement by shell transformation.
Yang, G., Yao, Y., Fang, J., Tian, G. and Lu, L.
(2016)
Large-eddy simulation of shock-wave/turbulent boundary-layer interactions and its control using Sparkjet.
Yao, J., Yao, Y., Arini, A., McIlwain, S. and Gordon, T.
(2016)
Modelling air and water two-phase annular flow in small horizontal pipe.
Effendy, M., Yao, Y., Yao, J. and Marchant, D.
(2016)
DES study of blade trailing edge cutback cooling performance with various lip-thicknesses.
Yang, G., Yao, Y., Fang, J., Gan, T., Li, Q. and Lu, L.
(2016)
Large-eddy simulation of shock-wave/turbulent boundary layer interaction with and without SparkJet control.
Fang, J., Yao, Y., Zheltovodov, A., Li, Z. and Lu, L.
(2015)
Direct numerical simulation of supersonic turbulent flows around a tandem expansion-compression corner.
Yao, J. and Yao, Y.
(2015)
Experimental study of characteristics of bimetallic Pt–Fe nano-particle fuel cell electrocatalyst.
Bauer, P., Bengherbia, T., Knowlen, C., Bruckner, A., Yao, Y. and Giraud, M.
(2015)
Equations of state implementation for 1-D modelling of performance in ram accelerator thermally choked propulsion mode.
Horikiri, K., Yao, Y. and Yao, J.
(2015)
Numerical optimisation of thermal comfort improvement for indoor environment with occupants and furniture.
Fang, J., Yao, Y., Li, Z. and Lu, L.
(2014)
Investigation of low-dissipation monotonicity-preserving scheme for direct numerical simulation of compressible turbulent flows.
Horikiri, K., Yao, Y. and Yao, J.
(2014)
Modelling conjugate flow and heat transfer in a ventilated room for indoor thermal comfort assessment.
Castagna, J., Yao, Y. and Yao, J.
(2014)
Direct numerical simulation of a turbulent flow over an axisymmetric hill.
Khali, E. H. and Yao, Y.
(2014)
On the reliability of Reynolds-averaged Navier Stokes prediction of mean flow characteristics of a rectangular turbulent jet in crossflow.
Effendy, M., Yao, Y. and Yao, J.
(2013)
Effect of mesh topologies on wall heat transfer and pressure loss prediction of a blade coolant passage.
Yao, Y.
(2013)
Scramjet flow and intake SBLI: Technical challenges and case study.
Yao, Y., Effendy, M. and Yao, J.
(2013)
Evaluation of wall heat transfer in blade trailing-edge cooling passage.
Kusztelan, A., Marchant, D., Yao, Y. and Wang, Y.
(2013)
Investigating the effects on the low speed response of a pressure charged IC engine through the application of a twin-entry turbine housing.
Castagna, J. and Yao, Y.
(2012)
Multi-block high order DNS code development for jet in turbulent cross-flow simulation.
Salin, A., Yao, Y. and Zheltovodov, A.
(2012)
Flow topology and secondary separation modelling at crossing shock wave/turbulent boundary-layer interaction conditions.
Yao, J. and Yao, Y.
(2012)
CFD Prediction and experimental measurement of blade water coverage in a diesel turbocharger.
Yao, Y., Maidi, M. and Yao, J.
(2012)
Effect of jet inclination angle and hole exit shape on vortical flow structures in low-reynolds number jet in cross-flow.
Horikiri, K., Yao, Y. and Yao, J.
(2012)
Numerical study of unsteady airflow phenomena in a ventilated room.
Yao, Y., Zheng, Y. and Rincon, D.
(2012)
Shock induced separating flows in scramjet intakes.
Bengherbia, T., Yao, Y., Bauer, P., Giraud, M. and Knowlen, C.
(2011)
Improved one-dimensional unsteady modelling of thermally choked ram accelerator in sub-detonative velocity regime.
Bengherbia, T., Yao, Y., Bauer, P. and Knowlen, C.
(2011)
Numerical study of gaseous reactive flow over a ram accelerator projectile in subdetonative velocity regime.
Yao, J. and Yao, Y.
(2011)
Computational study of hole shape effect on film cooling performance.
Yao, Y. and Maidi, M.
(2011)
Direct numerical simulation of single and multiple square jets in cross-flow.
Bengherbia, T., Yao, Y., Bauer, P., Giraud, M. and Knowlen, C.
(2011)
Improved one-dimensional unsteady modelling of thermally choked ram accelerator in sub-detonative velocity regime.
Yao, Y., Salin, A. and Lo, S. H.
(2011)
Numerical analysis of wall properties in crossing-shock-wave/turbulent-boundary-layer interactions.
Horikiri, K., Yao, Y. and Yao, J.
(2011)
Numerical simulation of convective airflow in an empty room.
Yao, Y. and Yao, J.
(2011)
The effect of hole shape on blade cooling effectiveness.
Kusztelan, A., Yao, Y., Marchant, D. and Wang, Y.
(2011)
A review of novel turbocharger concepts for enhancements in energy efficiency.
Castagna, J. and Yao, Y.
(2010)
Development of a multi-block high-order DNS code for turbulent flow simulations.
Yao, J., Sian, S., Yao, Y. and Davis, T. W.
(2010)
Numerical study of hole shape effect on blade cooling effectiveness.
Bengherbia, T., Yao, Y., Bauer, P. and Knowlen, C.
(2010)
Equations of state for 1-D modelling of ram accelerator thrust in sub-detonative propulsion mode.
Bengherbia, T., Yao, Y., Bauer, P. and Knowlen, C.
(2010)
Equations of state for 1-D modelling of ram accelerator thrust in thermally choked propulsion mode.
Bengherbia, T., Bauer, P., Yao, Y. and Knowlen, C.
(2010)
One-dimensional performance modelling of the ram accelerator in sub-detonative regime.
Yao, Y. and Yao, J.
(2010)
The effect of hole shape on blade cooling effectiveness.
Yao, Y. and Amos, I.
(2010)
The effect of variable gas property on axial turbine performance.
Yao, J., Yao, Y., Mason, P. J. and Patel, M. K.
(2009)
Numerical simulation of heat transfer in rectangular microchannel.
Yao, J., Yao, Y., Mason, P., Zhang, T., Heyes, F. J. G. and Roach, P. E.
(2009)
CFD modelling of water injection for turbine blade cleaning.
Yao, Y.
(2009)
Direct simulation of flow interactions in multiple jets in cross-flow.
Yao, Y.
(2009)
Direct numerical simulation of multiple jets in cross-flow.
Maidi, M. and Yao, Y.
(2008)
Numerical visualization of vortex flow behavior in square jets in cross-flow.
Shang, Z., Yao, Y. and Chen, S.
(2008)
Numerical investigation of system pressure effect on heat transfer of supercritical water flows in a horizontal round tube.
Duddempudi, D., Yao, Y., Edmondson, D., Yao, J. and Curley, A.
(2007)
Computational study of flow over generic fan-wing airfoil.
Yao, Y., Krishnan, L., Sandham, N. and Roberts, G.
(2007)
The effect of Mach number on unstable disturbances in shock/boundary-layer interactions.
Yao, J., Yao, Y., Patel, M. K. and Mason, P. J.
(2007)
On Reynolds number and scaling effects in microchannel flows.
Duddempudi, D., Yao, Y., Edmondson, D., Yao, J. and Curley, A.
(2007)
Computational study of flow over generic fan-wing airfoil.
Yao, Y., Krishnan, L., Sandham, N. D. and Roberts, G. T.
(2007)
The effect of Mach number on unstable disturbances in shock/boundary-layer interactions.
Yao, Y., Petty, D., Barrington, P., Yao, J. and Mason, P.
(2006)
Direct numerical simulation of jets in cross-flow.
Krishnan, L., Yao, Y., Sandham, N. D. and Roberts, G. T.
(2005)
On the response of shock-induced seoaration bubble to small amplitude disturbances.
Sandham, N. D., Yao, Y. and Lawal, A. A.
(2003)
Large-eddy simulation of transonic turbulent flow over a bump.
Thomas, T., Yao, Y. and Sandham, N.
(2003)
Structure and energetics of a turbulent trailing edge flow.
Yao, Y. and Sandham, N.
(2002)
Direct numerical simulation of turbulent trailing-edge flow with base flow control.
Yao, Y., Savill, A. M., Sandham, N. D. and Dawes, W. N.
(2002)
Simulation and modelling of turbulent trailing-edge flow.
Yao, Y. and Sandham, N.
(2002)
Direct numerical simulation of turbulent trailing edge flow with base flow control.
Yao, Y., Savill, A. M., Sandham, N. D. and Dawes, W. N.
(2002)
Simulation and modelling of turbulent trailing-edge flow.
Yao, Y., Thomas, T., Sandham, N. and Williams, J.
(2001)
Direct numerical simulation of turbulent flow over a rectangular trailing edge.
## Book Section
Yao, J., Yao, Y. and Mirzaii, H.
(2015)
Proton modified Pt zeolite fuel cell electrocatalysts.
In: Sayigh, A., ed.
(2015)
Salin, A., Yao, Y., Lo, S. H. and Zheltovodov, A. A.
(2012)
Flow topology of symmetric crossing shock wave boundary layer interactions.
In: Kontis, K., ed.
(2012)
## Conference or Workshop Item
Bauer, P., Bengherbia, T., Yao, Y., Knowlen, C., Bruckner, A. and Giraud, M.
(2017)
Equations of state for thrust modeling of ram accelerator at different bores.
In:
Fang, J., Gao, Y., Yao, Y., Liu, Y. and Lu, L.
(2017)
Direct numerical simulation of a tip-leakage vortex model in a planar duct with a longitudinal slit.
In:
Yao, J. and Yao, Y.
(2017)
Zeolite supported Pd electrocatalyst nano-particle characterization.
In:
Yao, J. and Yao, Y.
(2017)
Ex-situ exafs investigation of zeolite supported pt electrocatalyst structure.
In:
Ni, W., Lu, L., Fang, J., Yao, Y. and Moulinec, C.
(2017)
Large-scale secondary vortices in the turbulent channel flow induced by active wall actuations.
In:
Ni, W., Fang, J., Moulinec, C., Emerson, D. R., Lu, L. and Yao, Y.
(2017)
Large-scale Secondary Vortices Generated by Wall
Actuations: Application to the Turbulent Channel Flow.
In:
Ouyang, B., Yao, Y. and Bouferrouk, A.
(2017)
DES prediction of a 3-element high-lift airfoil with a blown flap.
In:
Abdessemed, C., Yao, Y., Narayan, P. and Bouferrouk, A.
(2017)
Unsteady parametrization of a morphing wing design for improved aerodynamic performance.
In:
Yang, G., Fang, J., Liu, C., Yao, Y. and Lu, L.
(2017)
Large-eddy simulation of MVG controlled oblique shockwave/boundary layer interaction.
In:
Qiu, J., Zhu, Q., Nibouche, M. and Yao, Y.
(2017)
U-model enhanced control of nonminimum-phase dynamic systems.
In:
Qiu, J., Zhu, G., Zhu, Q., Nibouche, M. and Yao, Y.
(2016)
Comparative study on pole placement controller design with U-model approach & classical approach.
In:
Yang, G., Yao, Y., Fang, J., Gan, T. and Lu, L.
(2016)
Large-eddy simulation of shock-induced flow separation control using SparkJet concept.
In:
Huang, J., Cao, Y., Yao, Y. and Yao, J.
(2016)
Multistep simulation for three-dimensional ice accretion on an aircraft wing.
In:
Xing, F., Xiaoyuan, F., Can, L. and Yao, Y.
(2016)
Numerical investigation on two streamline-traced busemann inlet-isolators.
In:
Ouyang, B., Yao, Y. and Bouferrouk, A.
(2016)
DES prediction of a novel high-lift device step 1: Steady blowing.
In:
Ouyang, B., Yao, Y. and Bouferrouk, A.
(2016)
DES prediction of near stall performance of a high lift airfoil.
In:
Evans, C., Harmer, M., Marks, O., Tiley, S., Willis, T., Bouferrouk, A. and Yao, Y.
(2016)
Development and testing of a variable camber morphing wing mechanism.
In:
Ni, W., Fang, J., Yao, Y., Moulinec, C. and Lu, L.
(2016)
Large-scale turbulent secondary flows induced by spanwise alternatively distributed strips control.
In:
Arini, A., Yao, J., Gordon, T. and Yao, Y.
(2016)
Numerical investigation of wavy-annular airwater two-pase flow in a small horizontal pipe.
In:
Castagna, J. and Yao, Y.
(2016)
On the effect of the distance between longitudinally
ridged walls in a turbulent channel flow.
In:
Fang, J., Yang, G., Yao, Y., Liu, C. and Lu, L.
(2016)
Shock-wave/boundary layer interaction control using spark-jet and micro-vortex generator.
In:
Fang, J., Yao, Y., Zheltovodov, A. A. and Lu, L.
(2015)
Large-eddy simulation of a three-dimensional shock-wave/turbulent boundary layer interaction of a single-fin.
In:
Yao, J. and Yao, Y.
(2015)
CFD of air/water two-phase flow in small horizontal pipe.
In:
Yao, Y. and Zheng, Y.
(2015)
DNS of transitional and turbulent flow simulations.
In:
Fang, J., Yao, Y., Lu, L. and Zheng, Y.
(2015)
LES of hypersonic flow over a 3D single-fin.
In:
Fang, J., Yao, Y. and Lu, L.
(2015)
Assessment of the low-dissipation monotonicity-preserving scheme in a series of DNS of shock-wave/turbulent boundary layer interactions.
In:
Fang, J., Yao, Y., Zheltovodov, A. A. and Lu, L.
(2015)
Large-eddy simulation of a three-dimensional hypersonic shock wave turbulent boundary layer interaction of a single fin.
In:
Khali, E. H. and Yao, Y.
(2015)
Mixing flow characteristics for a transverse sonic jet injecting into a supersonic crossflow.
In:
Yao, Y., Fang, J., Zheltovodov, A. A. and Lu, L.
(2014)
Direct numerical simulation of supersonic flows passing a backward step.
In:
Yao, J., Yao, Y. and Mirzaii, H.
(2014)
Proton modified Pt zeolite fuel cell electrocatalysts.
In:
Xie, L., Zheng, Y. and Yao, Y.
(2014)
Effects of micro blowing/suction flow control devices on
a NACA0015 airfoil.
In:
Fang, J., Yao, Y., Zheltovodov, A. A. and Lu, L.
(2014)
Numerical simulations of two-dimensional and three-dimensional shock wave/turbulent boundary layer interactions.
In:
Fang, J., Yao, Y., Lu, L. and Zheltovodov, A. A.
(2014)
Direct numerical simulation of supersonic turbulent flow in an expansion-compression corner at mach=2.9.
In:
Bengherbia, T., Yao, Y., Bauer, P., Giraud, M. and Knowlen, C.
(2011)
Improved one-dimensional unsteady modeling of thermally choked ram accelerator in sub-detonative velocity regime.
In:
Kusztelan, A., Yao, Y., Marchant, D. and Wang, Y.
(2011)
Increasing low speed engine response of a downsized CI engine equipped with a twin-entry turbocharger.
In:
Horikiri, K. and Yao, Y.
(2011)
Validation study of convective airflow in an empty room.
In:
Yao, Y., Salin, A. and Lo, S.
(2011)
Numerical analysis of wall properties in crossing-shock-wave/turbulent-boundary-layer interactions.
In:
Kusztelan, A., Yao, Y., Marchant, D. and Wang, Y.
(2010)
A review of novel turbocharger concepts for enhancements in energy efficiency.
In:
Castagna, J. and Yao, Y.
(2010)
Development of a multi-block high-order DNS code for turbulent flow simulations.
In:
Bengherbia, T., Yao, Y., Bauer, P. and Knowlen, C.
(2010)
Thrust prediction in thermally choked ram accelerator.
In:
Yao, J., Sian, S., Khan, J. and Yao, Y.
(2010)
Effect of hole shape on blade cooling effectiveness.
In:
Yao, J., Yao, Y., Mason, P., Zhang, T., Heyes, F. J. G. and Roach, P. E.
(2009)
Simulation of gas water two-phase flow in diesel turbocharger.
In:
Yao, J., Mouzoun, O., Yao, Y. and Mason, P.
(2009)
Unsteady RANS calculation of flow over Ahmed car model.
In:
Yao, J., Yao, Y., Mason, P. and Zhang, T.
(2008)
The CFD modelling of water injection flow in turbocharger.
In:
Yao, J., Yao, Y., Mason, P. and Zhang, T.
(2008)
CFD modelling of water injection flow for turbine blades cleaning.
In:
Shang, Z. and Yao, Y.
(2008)
CFD investigation of heat transfer in supercritical water-cooled flow through 3X3 fuel rod bundles.
In:
Yao, J., Yao, Y., Manson, P. J., Zhang, T., Heyes, F. J. G. and Roach, P. E.
(2007)
Computational prediction of local distorted flow in turbocharger.
In:
Yao, J., Patel, M. K., Yao, Y. and Mason, P. J.
(2006)
Numerical simulation of heat transfer in rectangular microchannel.
In:
Yao, J., Yao, Y., Patel, M. K. and Mason, P. J.
(2006)
Numerical simulation of microchannel cooling and heat transfer.
In:
Yao, Y., Petty, D., Barrington, P., Yao, J. and Mason, P.
(2006)
Direct numerical simulation of jets in cross-flow.
In:
## Thesis
Yao, Y.
(1996)
This list was generated on Fri Dec 15 02:33:47 2017 GMT. |