Items where School or Centre is "Faculty of Environment and Technology > Department of Engineering Design and Mathematics" and Year is 2005

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: B | C | D | I | K | M | P | S | V | Y
Number of items: 19.

B

Buss, M., Kuschel, M., Lee, K.-K., Peer, A., Stanczyk, B. and Unterhinninghofen, U. (2005) High fidelity telepresence systems: Design, control, and evaluation. In: Joint International COE/HAM SFB-453 Workshop on Human Adaptive Mechatronics and High-Fidelity Telepresence, Tokyo, Japan, 6 October 2005. Available from: http://eprints.uwe.ac.uk/23820

C

Cardoso, R. P. and Yoon, J. (2005) One point quadrature shell element with through-thickness stretch. Computer Methods in Applied Mechanics and Engineering, 194 (9-11). pp. 1161-1199. ISSN 0045-7825 Available from: http://eprints.uwe.ac.uk/18741

Cardoso, R. P. and Yoon, J. (2005) One point quadrature shell element with through-thickness stretch. In: Numisheet, 2005, Detroit USA, 15-19 August, 2005, Detroit, USA, 15-19 August, 2005. Detroit, USA: UNSPECIFIED Available from: http://eprints.uwe.ac.uk/19645

Cardoso, R. P. and Yoon, J. (2005) One point quadrature shell elements for sheet metal forming analysis. Archives of Computational Methods in Engineering, 12. pp. 3-66. ISSN 1134-3060 Available from: http://eprints.uwe.ac.uk/18739

Cardoso, R. P., Yoon, J., Valente, R., Gracio, J., Simoes, F. and Sousa, R. (2005) A nonlinear kinematic hardening model for the simulation of cyclic loading paths in anisotropic aluminum alloy sheets. In: 8th International Conference on Computational Plasticity (COMPLAS 2005), Barcelona, Spain, September 5-8, 2005 , Barcelona, Spain, September 5-8, 2005. Barcelona, Spain: UNSPECIFIED Available from: http://eprints.uwe.ac.uk/19646

Clark, A. (2005) Rolling horizon heuristics for production and setup planning with backlogs and error-prone demand forecasts. Production Planning & Control, 16 (1). pp. 81-97. ISSN 1366-5871 Available from: http://eprints.uwe.ac.uk/5845

D

Dogramadzi, S., Virk, G. S., Bell, G. D., Rowland, R. S. and Hancock, J. (2005) Recording forces exerted on the bowel wall during colonoscopy: In vitro evaluation. International Journal of Medical Robotics and Computer Assisted Surgery, 1 (4). pp. 89-97. ISSN 1478-5951 Available from: http://eprints.uwe.ac.uk/25722

I

Ieropoulos, I., Melhuish, C., Greenman, J. and Horsfield, I. (2005) EcoBot-II: An artificial agent with a natural metabolism. Journal of Advanced Robotic Systems, 2 (4). pp. 295-300. ISSN 1729-8806 Available from: http://eprints.uwe.ac.uk/5896

K

Kay, P. J., Bowen, P. J., Gold, M. and Sapsford, S. (2005) Impingement studies of G-DI sprays at atmospheric and elevated ambient densities. In: Proceedings of 18th Annual Conference on Liquid Atomization and Spray Systems, Irvine, California, 22-25 May 2005. Available from: http://eprints.uwe.ac.uk/26361

Krishnan, L., Yao, Y., Sandham, N. D. and Roberts, G. T. (2005) On the response of shock-induced seoaration bubble to small amplitude disturbances. Modern Physics Letters B, 19 (28n29). pp. 1495-1498. ISSN 0217-9849 Available from: http://eprints.uwe.ac.uk/17579

M

Mitchell, T. J. and Pipe, A. G. (2005) Convergence synthesis of dynamic frequency modulation tones using an evolution strategy. In: EvoWorkkshops 2005: EvoBIO, E. E. E. E. a. E., ed. (2005) Applications on Evolutionary Computing. (Volume) Lausanne: Springer Berlin/ Heidelberg, pp. 533-538. ISBN 978-3-540-25396-9 Available from: http://eprints.uwe.ac.uk/8205

P

Parente, M., Valente, R., Jorge, N., Cardoso, R. P. and Sousa, R. (2005) Fully-integrated EAS-based solid-shell finite elements in implicit sheet metal forming simulations. In: Numisheet, 2005, Detroit USA, 15-19 August, 2005, Detroit USA, 15-19 August, 2005. Detroit, USA: UNSPECIFIED Available from: http://eprints.uwe.ac.uk/19643

Parente, M., Valente, R., Natal, R., Cardoso, R. P. and Sousa, R. (2005) Sheet metal forming simulation using EAS solid-shell finite elements. In: 8th ESAFORM Conference on Material Forming, Cluj-Napoca, Romania, April 1, 2005, Cluj-Napoca, Romania, April 1, 2005. Cluj-Napoca, Romania: UNSPECIFIED Available from: http://eprints.uwe.ac.uk/19647

Peer, A., Stanczyk, B. and Buss, M. (2005) Haptic telemanipulation with dissimilar kinematics. In: IEEE/RSJ International Conference on Intelligent Robots and Systems, Edmonton, Canada, 2-6 August 2005., 3493 - 3498 Available from: http://eprints.uwe.ac.uk/23882

Peer, A., Unterhinninghofen, U., Lee, K., Stanczyk, B. and Buss, M. (2005) Haptic telemanipulation in extensive remote environments. In: Joint International COE/HAM SFB-453 Workshop on Human Adaptive Mechatronics and High-Fidelity Telepresence, Tokyo, Japan, 6 October 2005. Available from: http://eprints.uwe.ac.uk/23885

S

Sousa, R., Cardoso, R. P., Valente, R., Yoon, J., Gracio, J. and Natal, R. (2005) Development of a one point quadrature EAS solid-shell element for sheet forming processes. In: Numisheet 2005, Detroit, USA, 15-19 August, 2005, Detroit, USA, 15-19 August, 2005. Detroit, USA: UNSPECIFIED Available from: http://eprints.uwe.ac.uk/19644

Sousa, R., Cardoso, R. P., Valente, R., Yoon, J., Gracio, J. and Natal, R. (2005) A new one-point quadrature enhanced assumed strain solid-shell element with multiple integration points along thickness Part I - geometrically linear applications. International Journal for Numerical Methods in Engineering, 62 (7). pp. 952-977. ISSN 0029-5981 Available from: http://eprints.uwe.ac.uk/18740

V

Valente, R., Parente, M., Jorge, N., Sousa, R., Cardoso, R. P., Cesar de Sa, J. and Gracio, J. (2005) Enhanced assumed strain shell and solid-shell finite element formulations for sheet metal forming. In: Congreso de M ́etodos Num ́ericos en Ingenieria, Granada, Spain, July, 2005. Available from: http://eprints.uwe.ac.uk/19642

Y

Yang, J., Montakhab, M., Pipe, A. G., Carse, B. and Davies, T. S. (2005) Application of multi-agent technology to fault diagnosis of power distribution systems. International Journal of Intelligent Information Technologies, 1 (2). pp. 1-16. ISSN 1548-3657 Available from: http://eprints.uwe.ac.uk/5892

This list was generated on Wed Sep 20 02:07:58 2017 BST.